Use this procedure to manually create a mitered corner between a door/window assembly and another object, such as a standard wall or a mass element. For example, if your door/window assembly connects with a standard wall that is at a 60-degree angle from the door/window assembly, you would set the miter angle to 30.
The miter angle is applied to all infills and horizontal edges that are adjacent to the corner. Vertical edges are not affected.
| If you want to miter the door/window assembly… | Then… |
|---|---|
| at its start point | enter an angle for Start Miter, and press Enter. |
| at its end point | enter an angle for End Miter, and press Enter. |