To Use Anchors to Change the Vertical Position of a Door

Use this procedure to change the vertical position of doors in a wall to which the doors are anchored.

Door position along the Z axis parameters

1. Select the door you want to change.
2. Click Door tabAnchor panelSettings.
3. Select the reference point for the anchor along the Z axis:

   If you want to…	Then…
   use the bottom of the wall height as your reference point	select Bottom of wall (curve) height for From.
   use the center of the wall height as your reference point	select Center of wall (curve) height for From.
   use the top of the wall height as your reference point	select Top of wall (curve) height for From.

4. Enter the distance from the reference point at which to place the doors.

   Use a negative value to measure from endpoint to start point.

5. Select the position of the doors to measure to:

   If you want to…	Then…
   measure to the bottom of the doors	select Threshold (Bottom) of object for To.
   measure to the center of the doors	select Center of object for To.
   measure to the top of the doors	select Head (Top) of object for To.

6. Click OK.