Use this procedure to add or edit custom block components in the display representation of window styles.
Create the block in the same plane as the window that you use to represent the style.
If you want to… | Then… |
---|---|
add a new block component | click Add, and then click Select Block. |
edit an existing block component | select the component to edit, and click Edit. |
If you want to… | Then… |
---|---|
set the block scale to the width of the object | select Width. |
set the block scale to the depth of the object | select Depth. |
set the block scale to the height of the object | select Height. |
scale the whole block equally, so that one direction is scaled to fit another of the scale criteria | select Lock to XY Ratio. |
scale the block to its original size | clear all options under Scale to Fit. |
If you want to create a mirror of the block… | Then… |
---|---|
in the X direction | select Mirror X. |
in the Y direction | select Mirror Y. |
in the Z direction | select Mirror Z. |
If you want to add the block… | Then… |
---|---|
to the inside or outside of the frame | click Frame Component, and click either Outside or Inside. |
to all window glass components or a single window glass component | click Window Component, and click either All or Single. If you select Single, enter the component number. Note: If you specified Depth for Scale to Fit, the depth is scaled to the glass thickness. You can scale to the window panel thickness instead by selecting Scale Depth to Panel Thickness.
|
Frame and Glass components are not available in some display representations.
Click OK three times.