To Use Anchors to Change the Horizontal Position of a Window

Use this procedure to change the horizontal position of windows along a wall to which the windows are anchored.

When you insert a corner window, the first wall you specify is the anchored wall.

Window position along the X axis parameters

1. Select the windows you want to change, and double-click one of them.
2. On the Properties palette, expand Basic, and expand Location.
3. Click Anchor.
4. Select the reference point for the anchor along the X axis:

   If you want to…	Then…
   use the start of the wall as the reference point	under Position Along (X), select Start of wall for From.
   use the midpoint of the wall as the reference point	under Position Along (X), select Midpoint of wall for From.
   use the end of the wall as the reference point	under Position Along (X), select End of wall for From.

5. Enter the distance from the reference point at which to place the windows.

   Use a negative value to measure from endpoint to start point.

6. Select the position of the windows to measure to:

   If you want to measure to…	Then…
   the start edge of the windows	select Start Edge of object for To.
   the center of the windows	select Center of object for To.
   the end edge of the windows	select End Edge of object for To.

7. Click OK.