To Create a Dome Mass Element

Use this procedure to create a Dome mass element. The insertion point of the Dome mass element is at the centroid of its bottom face.

Dome mass element in 3D and plan views

1. On the Massing tool palette, select the Dome tool.

   Alternatively, you can click Home tabBuild panelBox drop-downDome.

2. Specify the insertion point of the Dome.
3. Drag the cursor and specify the radius of the Dome.
4. Enter a rotation angle, or press Enter to accept the default angle of 0.
5. Continue adding Dome mass elements, and press Enter.