To Use Anchors to Change the Vertical Position of a Window

Use this procedure to change the vertical position of windows in a wall to which the windows are anchored.

Window position along the Z axis parameters

1. Select the windows you want to change, and double-click one of them.
2. On the Properties palette, expand Basic, and expand Location.
3. Click Anchor.
4. Select the reference point for the anchor along the Z axis:

   If you want to…	Then…
   use the bottom of the wall height as the reference point	under Position Along (Z), select Bottom of wall height for From.
   use the center of the wall height as the reference point	under Position Along (Z), select Center of wall height for From.
   use the top of the wall height as the reference point	under Position Along (Z), select Top of wall height for From.

5. Enter the distance from the reference point at which to place the windows.

   Use a negative value to measure from endpoint to start point.

6. Select the position of the windows to measure to:

   If you want to measure to…	Then…
   the bottom of the windows	select Sill (Bottom) of object for To.
   the center of the windows	select Center of object for To.
   the top of the windows	select Head (Top) of object for To.

7. Click OK.