RECTANG (Command)

Creates a rectangular polyline.

Find

Creates a closed rectangular polyline from the specified parameters such as its diagonal corner points, dimensions, area, and type of corners.

The following prompts are displayed.

Current settings: Rotation = 0

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify a point or enter an option

First Corner Point

Specifies a corner point of the rectangle.

Other Corner Point

Creates a rectangle using the specified points as diagonally opposite corners.

Area

Creates a rectangle using the area and either a length or a width. If the Chamfer or Fillet option is active, the area includes the effect of the chamfers or fillets on the corners of the rectangle.

Dimensions

Creates a rectangle using length and width values.

Rotation

Creates a rectangle at a specified rotation angle.

Chamfer

Sets the chamfer distances for the rectangle.

Elevation

Specifies the Z-value for the rectangle. The default is 0.0.

Note: This value becomes the default for the active drawing until you enter a different value.

Fillet

Specifies the fillet radius of the rectangle.

Thickness

Specifies the distance that the sides of the rectangle appear to be extruded. The default is 0.

Note: This value becomes the default for the active drawing until you enter a different value.

Width

Specifies the polyline width of the rectangle to be drawn.