-POINTCLOUDATTACH (Command)

Inserts a point cloud file into the current drawing from the Command prompt.

The following prompts are displayed.

Enter File Name of Point Cloud

Specifies the full or relative path to the RCS or RCP file, or the file name only. If you specify the file name only, the point cloud file must be located in the same folder as the current drawing.

Entering a tilde (~) displays the Select Point Cloud File dialog box, a standard file selection dialog box.

Insertion Point

Specifies the location where the base point of the point cloud is attached to the current drawing.

Scale Factor

Specifies the relative scale of the inserted point cloud.

Rotation Angle

Specifies the rotation angle of the inserted point cloud in the current UCS.