Crops the display of a selected DGN underlay to a specified boundary.
The clipping boundary determines the portion of a DGN underlay outside the boundary that is hidden. The visibility of the clipping boundary is controlled by the DGNFRAME system variable.
The boundary you specify must be in a plane parallel to the DGN underlay.
The following prompts are displayed.
Turns on clipping and displays the DGN underlay clipped to the previously defined boundary.
Turns off clipping and displays the entire DGN underlay.
If you reclip the DGN underlay while clipping is turned off, clipping is automatically turned back on. You are prompted to delete the old boundary even when clipping is turned off and the clipping boundary is not visible.
Removes a predefined clipping boundary and displays the entire DGN underlay.
Defines a rectangular or polygonal clipping boundary, or generates a polygonal clipping boundary from a polyline.
Defines the boundary with the selected polyline. The polyline can be open but must consist of straight line segments and cannot intersect itself.
Defines a polygonal clipping boundary with three or more points that you specify for the vertices of a polygon.
Defines a rectangular boundary with the points that you specify for opposite corners.
Inverts the mode of the clipping boundary: objects are clipped either outside the boundary or inside the boundary.