Specifies a text prefix or suffix (or both) to the dimension measurement.
| Type: | String |
| Saved in: | Drawing |
| Initial value: | None |
For example, to establish a suffix for millimeters, set DIMPOST to mm; a distance of 19.2 units would be displayed as 19.2 mm.
If tolerances are turned on, the suffix is applied to the tolerances as well as to the main dimension.
Use <> to indicate placement of the text in relation to the dimension value. For example, enter <>mm to display a 5.0 millimeter radial dimension as "5.0mm". If you entered mm <>, the dimension would be displayed as "mm 5.0". Use the <> mechanism for angular dimensions.