Specifies point cloud insertion options, as well as scale, rotation, and geographic location information.
POINTCLOUDATTACH (Command) Find:
Specifies information for inserting a point cloud file. The point cloud is inserted at the specified coordinates, based on the location of the Insertion object snap.
The following options are displayed.
Identifies the point cloud file to attach.
Opens the Select Point Cloud dialog box, a standard file selection dialog box where you can find and select a point cloud file.
Specifies the type of file path.
Options include
The default path type is Relative path. Use REFPATHTYPE system variable to change the default path type.
Specifies the location in the drawing where the base point of the point cloud will be attached.
Specifies the scale factor for the inserted point cloud.
Specifies the relative scale of the point cloud as you attach it.
Specifies the rotation angle for the inserted point cloud in the current UCS.
Specifies the rotation angle of the point cloud using the pointing device.
Inserts the point cloud based on the geographic data in both the point cloud file and the drawing file.
Controls whether an attached point cloud can be moved or rotated (POINTCLOUDLOCK system variable).
Toggles the display of information about the attached point cloud, including size (reflects the units of measurement used by the current drawing), number of points, and whether information such as intensity data is included.