Controls whether the cursor position on the status bar is updated continuously or at specific times only. It also controls the format in which the coordinates are displayed.
| Type: | Integer |
| Saved in: | Registry |
| Initial value: | 1 |
|
Value |
Description |
|---|---|
|
0 |
Absolute coordinates are displayed; the coordinate display is updated only when a point is specified. |
|
1 |
Absolute coordinates are displayed; the coordinate display is updated continuously in realtime. |
|
2 |
Relative polar coordinates are displayed when a command is active and while you specify a point, distance, or an angle; the coordinate display is updated continuously in realtime. When a command is not active, absolute coordinate values are displayed.
Note: Z values are always in absolute coordinates.
|
|
3 |
Geographic (latitude and longitude) coordinates are displayed; the coordinate display is updated continuously in realtime. The coordinate format is controlled by the GEOLATLONGFORMAT system variable.
Note: Z values are not displayed when the drawing file contains geographic location information.
|