Create a 3D object by revolving curves about an axis.
When the Mode option is set to Surface, you create a surface and if Mode is set to Solid you create a solid regardless of whether the curve is open or closed. When revolving a solid, you can only use a revolve angle of 360 degrees.
Options for Revolving
- Mode. Sets whether the revolve creates a surface or a solid.
- Start Angle. Specifies an offset for the revolution from the plane of the object being revolved.
- Reverse. Changes the direction of the revolve.
- Expression. Enter a formula or equation to specify the revolve angle. This option is only available if you are creating associative surfaces.