Sets a camera and target location to create and save a 3D perspective view of objects.
Find
The following prompts are displayed
- Camera location
- Sets the point from which to view objects in a model. Enter a value or specify a point.
- Target location
- Sets the target location of a camera’s lens. Enter a value or specify a point.
- ?—List Cameras
-
Displays a list of the currently defined cameras. Enter a camera name or enter * to list all cameras.
- Name
-
Specifies a new name for the current camera.
- Location
-
Modifies the initial placement of the camera.
- Height
-
Specifies the camera height.
- Target
-
Specifies the target of the camera.
- Lens
-
Specifies the lens length of the camera in millimeters, which must be a positive number that is 600 or less.
- Clipping
-
Defines front and back clipping planes and sets their values. Clipping planes are boundaries that set limits on the field of view.
-
Enable front clipping plane? Specify Yes or No.
-
Specify front clipping plane offset from target plane. Enter a distance.
-
Enable back clipping plane? Specify Yes or No.
-
Specify back clipping plane offset from target plane. Enter a distance.
- View
-
Sets whether to switch the current view to match the camera settings. Specify Yes or No.
- Exit
-
Ends the command, saving the current settings.