Modify Line Reference Numbers Dialog Box

Renumbers ladder references and adjusts ladder-specific settings.

Find

 Command entry:  AEREVISELADDER

Find

 Command entry:  AE2LADDER

Select the top line reference number and press Enter.

When converting line reference numbering using the Convert Ladder tool, select only the first line reference number to determine location, size, and justification of the new line reference numbers being converted. Once OK is pressed, existing ladder information is erased and the new smart ladder is inserted.

You can adjust the line reference numbering along the side of the ladders. The existing ladder rung spacing does not change.

Note: Updating the reference numbers of the ladder does not update existing components or wire numbers.

Rung spacing	Specifies the spacing between each rung.
Rung count	Specifies the number of rungs for each ladder.
Reference numbers	Specifies the length of the ladder by adjusting the begin and end reference numbers. The first line reference number on each ladder is a smart AutoCAD block and attributes. All the rest of the numbers are text entities (that can be erased, but do not erase the top or first line reference number).
Index	Specifies the line reference number increment value (default=1). Selecting Redo forces a refresh of line reference numbering.
Wire number format	Specifies the format for placing wire numbers. (default = configure wire number format value) You can specify a unique automatic wire numbering format on a per ladder basis (ex: one ladder of 24-volt wiring requiring wire numbers with a unique prefix or suffix, ex: %NVDC).