Provides a quick guide to which commands are new in this release.
2022 New Commands and System Variables
New commands | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
EXPORTLAYOUT | Creates a visual representation of the current layout in the model space of a new drawing. | X | X |
PURGEAECDATA | Removes the invisible AutoCAD Architecture custom data in the drawing allowing you to save the drawing to a previous version without any warnings. | X | X |
2021 New Commands and System Variables
New commands | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
BREAKATPOINT | Breaks the selected object into two objects at a specified point. | X | X |
-INSERTCONTENT | Inserts a drawing or block into the current drawing. | X | X |
-PAGESETUP | Command line version of the PAGESETUP command intended for overriding the settings of page setups in scripts and other customization. | X | X |
REVCLOUDPROPERTIES | Controls the approximate chord-length for the arcs in a selected revision cloud. | X | X |
XCOMPARE | Compares an attached xref with the latest state of the referenced drawing file, highlighting the differences with color within revision clouds. | X | X |
XCOMPARECLOSE | Closes the Xref Compare visor and ends the comparison. | X | X |
XCOMPARERCNEXT | Zooms to the next change set of the xref comparison result. | X | X |
XCOMPARERCPREV | Zooms to the previous change set of the xref comparison result. | X | X |
New system variables | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
COMMANDWINDOWDOCKSTATE | Indicates whether the command window is docked or floating. | X | X |
COMPARESHOWCONTEXT | Controls the visibility of objects that are not used in the xref comparison. | X | X |
REVCLOUDARCVARIANCE | Controls whether revcloud arcs are created with varying or uniform chord lengths. | X | X |
SECUREREMOTEACCESS | Controls whether ObjectARX programs are restricted from accessing internet locations or remote servers. | X | X |
TEXTGAPSELECTION | Controls whether you can select text or mtext objects within the gaps or spaces between the letters. | X | X |
TEXTLAYER | Specifies a default layer for new text and multiline text objects in the current drawing. | X | X |
TRIMEDGES | Controls whether trimming and extending to hatches with Quick mode is limited to the edges of the hatches or includes the objects within hatch patterns. | X | X |
TRIMEXTENDMODE | Controls whether the TRIM and EXTEND commands use streamlined inputs by default. | X | X |
XCOMPAREBAKPATH | Specifies the path where the backup xref file is stored. | X | X |
XCOMPAREBAKSIZE | Sets the size of the folder where the backup xref file is stored. | X | X |
XCOMPARECOLORMODE | Switches the visual effect of objects in the host drawing during an xref comparison. | X | X |
XCOMPAREENABLE | Enables the comparison between an xref and the referenced drawing file. | X | X |
2020 New Commands and System Variables
New commands | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
CLASSICINSERT | Inserts a block or drawing into the current drawing using the classic version of the INSERT command. | X | X |
COMPARECLOSE | Closes the DWG Compare visor and exits the comparison. | X | X |
COMPAREEXPORT | Exports the comparison results into a new drawing, called a snapshot drawing, and opens the drawing. | X | X |
COMPAREIMPORT | Imports objects from the compared file into the current drawing. Only the selected objects that exist in the compared file and not in the current file are imported. | X | X |
COMPAREINFO | Displays the information about the two compared drawing files. | X | X |
New system variables | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
BLOCKMRULIST | Controls the number of most recently used blocks displayed in the Recent pane of the Blocks palette. | X | X |
BLOCKREDEFINEMODE | Controls whether a dialog box displays when inserting a block from the Blocks palette with the same name as an existing block definition. | X | X |
LTGAPSELECTION | Controls whether you can select or snap to the gaps on objects defined with non-continuous linetype. | X | X |
MEASUREMODE | Controls whether the MEASUREGEOM command always defaults to the Quick option. | X | X |
ROLLOVERTIPS | Controls the display of rollover tooltips when the cursor hovers over an object. | X | X |
2019 New Commands and System Variables
New commands | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
COMPARE | Provides a visual comparison between two drawings, highlighting the differences. | X | X |
-COMPARE | Provides a visual comparison between two drawings, highlighting the differences, using the command line. | X | X |
NEWVIEW | Saves a new, named view from the display in the current viewport, or by defining a rectangular window. | X | X |
New system variables | Description | AutoCAD | AutoCAD LT |
---|---|---|---|
COMPARECOLOR1 | Sets the color in the comparison drawing for the objects that exist only in the first drawing selected for comparison. | X | X |
COMPARECOLOR2 | Sets the color in the comparison drawing for the objects that exist only in the second drawing selected for comparison. | X | X |
COMPARECOLORCOMMON | Sets the color in the comparison drawing for the objects that are identical in the two drawings selected for comparison. | X | X |
COMPAREFRONT | Controls the default display order of overlapping objects in the comparison drawing. | X | X |
COMPAREHATCH | Controls whether hatch objects are included in the drawing comparison. | X | X |
COMPAREPROPS | Controls whether a change in an object's property is identified as a change in the drawing comparison. | X | X |
COMPARERCMARGIN | Specifies the offset distance between the boundary of a change set and the revision cloud in the comparison drawing. | X | X |
COMPARERCSHAPE | Controls whether individual changes are merged as a single large rectangle or a series of smaller rectangle in the compare result drawing. | X | X |
COMPARESHOW1 | Displays the objects that exists only in the first drawing. | X | X |
COMPARESHOW2 | Displays the objects that exists only in the second drawing. | X | X |
COMPARESHOWCOMMON | Displays the objects that are identical in both the drawings that are being compared. | X | X |
COMPARESHOWRC | Shows a revision cloud around the difference in the compare result drawing. | X | X |
COMPARETEXT | Controls whether text objects are included in the drawing comparison. | X | X |
COMPARETOLERANCE | Specifies the tolerance used when comparing two drawing files-entities are considered identical if they are below or equal to a specified decimal point value. | X | X |
VISRETAINMODE | Controls which xref layer properties to automatically sync on reload when the VISRETAIN system variable is set to 1. | X | X |
XREFLAYER | Specifies a default layer for a new xref. | X | X |