To Draw Freehand Sketches

1. At the Command prompt, enter sketch.
2. Press Enter again to accept the last saved type, increment, and tolerance values.
3. Move cursor in the drawing area to begin sketching.

   As you move the pointing device, freehand line segments of the specified length are drawn. During the command, freehand lines are displayed in a different color.

4. Click to suspend sketching.

   You can click a new start point to resume drawing from the new cursor location.

5. Press Enter to complete the sketch.

An alternate method:

1. At the Command prompt, enter sketch.
2. Click and hold to begin sketching and move your cursor. Release to suspend sketching.
3. Repeat the previous step as needed.
4. Press Enter to complete the sketch.

Note: SKETCH does not accept coordinate input.