If you use an alternate text editor, you apply formatting by entering format codes.
To apply formatting, use the format codes shown in the following table.
Format codes for paragraphs |
|||
---|---|---|---|
Format code |
Purpose |
Enter this … |
To produce this … |
\0...\o |
Turns overline on and off |
Autodesk \OAutoCAD\o |
|
\L...\l |
Turns underline on and off |
Autodesk \LAutoCAD\l |
|
\K...\k |
Turns stikethrough on and off |
Autodesk\KAutoCAD\k |
|
\~ |
Inserts a nonbreaking space |
Autodesk AutoCAD\~LT |
|
\\ |
Inserts a backslash |
Autodesk \\AutoCAD |
|
\{...\} |
Inserts opening and closing braces |
Autodesk \{AutoCAD\} |
|
\Cvalue; |
Changes to the specified color |
Autodesk \C2;AutoCAD |
|
\File name; |
Changes to the specified font file |
Autodesk \Ftimes; AutoCAD |
|
\Hvalue; |
Changes to the text height specified in drawing units |
Autodesk \H2;AutoCAD |
|
\Hvaluex; |
Changes the text height to a multiple of the current text height |
Autodesk \H3x;AutoCAD |
|
\S...^...; |
Stacks the subsequent text at the /, #, or ^ symbol |
1.000\S+0.010^-0.000; |
|
\Tvalue; |
Adjusts the space between characters. Valid values range from a minimum of .75 to 4 times the original spacing between characters. |
\T2;Autodesk |
|
\Qangle; |
Changes obliquing angle |
\Q20;Autodesk |
|
\Wvalue; |
Changes width factor to produce wide text |
\W2;Autodesk |
|
\A |
Sets the alignment value; valid values: 0, 1, 2 (bottom, center, top) |
\A1;1\S1/2 |
|
\P |
Ends paragraph |
Autodesk\PAutoCAD |
|
Braces can be nested up to eight levels deep.