In the Style Manager, you can change a display representation for all elevation-based display components for objects in a particular domain. However, in the Display Manager, you configure the display representation for domain objects individually.
Make sure that you coordinate the configurations of the elevation-based display components with each other (such as, contour components with insulation components), and with the display components that are not elevation-based (for example, connector display components).
To configure elevation-based display components
- Select Enable Display by Elevation in the Options dialog box.
- Click
.
- Expand the desired objects folder.
- Expand the system definitions.
- Select the desired system definition, and then click the Display Properties tab in the right pane.
- To configure the Plan display representation, select Plan (default), and then click .
- On the Layer/Color/Linetype tab of the Display Properties dialog box, specify values for the elevation-based display components, such as Contour, Single Line, and Hatch. Click OK when done.
- To configure 1-line, on the Display Properties tab, select a 1-line display representation, and click . Repeat the previous step in the Display Properties dialog box.
To activate the display range in model view
- Click
.
- On the left pane, expand Sets, and select MEP Design - Model.
- On the right pane, click the Display Options tab.
- Under Live Sections and Materials, select Section AEC Objects by Display Range defined in Display Configuration.
As a result, the elevation-based display range you specified for the cut plane is visible in model view.