Use the AMPARTLIST command to create and place parts in a drawing.
Because parts lists are derived from the BOM, it is important that the appropriate BOM is set as the current BOM before you create a parts list. To create a GOST parts list, select GOST as the drawing standard.
When the AMPARTLIST command is used, data is extracted from the BOM and is displayed in the Parts List dialog box, based on the settings made in AMOPTIONS (For details on how to customize these settings, see the Configuration and Setup Guide). If necessary, you can modify the appearance of the parts list as well as modify the parts list data before you place the parts list in the drawing area.