Creates vertical linear dimensions.
Find
Summary
This command is a shortcut to the Linear 
Vertical option of the AMPOWERDIM command. It measures the vertical distance between two points. As you drag the dimension line, it snaps into position at a predefined distance from the object you are dimensioning.
List of Prompts
The following prompts are displayed.
- First extension line origin
- Specifies the first point that defines the vertical linear dimension (1 in the illustration).
- Second extension line origin
- Specifies the second point that defines the vertical linear dimension (2 in the illustration).
- Dimension line location
- Specifies where to place the dimension line. The dimension line moves only in the horizontal direction (3 in the illustration).
- Placement options
- Provides options to override the default distance snap settings.
- Select object - Specifies an object to use as the base for the distance snap calculation.
- Options - Displays a dialog box, which enables you to override the snap distance or turns distance snap on or off, temporarily.
- Options
-
Displays the Power Dimension Options dialog box enabling you to pre-configure options for this command session.
Note: This option is visible in the command line only if the AMPOWERDIMEDITOR system variable is set to 0 or the ribbon is turned off.