CrossGutter

Attachment

The attachment point is at flowline of the cross gutter. This component can be attached to either the left or right side.

Input Parameters

Note: All dimensions are in meters or feet unless otherwise noted. All slopes are in run-over-rise form (for example, 4 : 1) unless indicated as a percent slope with a “%” sign.

Parameter	Description	Type	Default
Side	Specifies which side to place the subassembly	Left / Right	Right
Gutter Composition	Determines if the left, right, or both are built	Both / Left / Right	Both
Base Thickness	Thickness of base under gutter	Numeric, positive	0.5 ft 0.15 m
Gutter Depth At Flowline	Depth of gutter at the flowline	Numeric, positive	0.5 ft 0.15 m
Gutter Grade	Gutter grade	Numeric	8 (%)
Gutter Width Left	Gutter width left	Numeric, positive	3 ft 0.9 m
Gutter Width Right	Gutter width right	Numeric	3 ft 0.9 m

Target Parameters

This section lists the parameters in this subassembly that can be mapped to one or more target objects. For more information, see To Specify Corridor Targets.

Parameter	Description	Status
Edge Elevation Right	May be used to override the right edge elevation of the cross gutter. The following object types can be used as targets for specifying the elevation: profiles, 3D polylines, feature lines, or survey figures.	Optional
Edge Elevation Left	May be used to override the left. The following object types can be used as targets for specifying the elevation: profiles, 3D polylines, feature lines, or survey figures.	Optional
Edge Offset Left	May be used to override the left edge elevation of the cross gutter. The following object types can be used as targets for specifying this offset: alignments, polylines, features lines, or survey figures.	Optional
Edge Offset Right	May be used to override the right width of the cross gutter. The following object types can be used as targets for specifying this offset: alignments, polylines, features lines, or survey figures.	Optional

Runtime Logical Assignments

None.

Output Parameters

None.

Behavior

The gutter links are inserted based on the input parameters. The targets may override the outside edge of the cross gutter on both the right and left sides. If the base thickness is greater than 0, then the base is built under the cross gutter.

Layout Mode Operation

In layout mode, this subassembly displays the cross gutter components based on the input parameters given.

Point, Link, and Shape Codes

The following table lists the point, link, and shape codes for this subassembly that have codes assigned to them. Point, link, or shape codes for this subassembly that do not have codes assigned are not included in this table.

Point, Link, or Shape	Code	Description
P1	FL	Flowline
P2, P7	GutterEdge	Edge of the gutter
P3, P6	Edge_Datum	Cross Gutter Edge bottom
P4, P5	Base_Datum	Bottom of the base
P8	FL_Datum	Datum at the flowline
L1, L7	Top, Gutter	Top of the cross gutter
L3, L5	Gutter, Datum	Bottom of the gutter
L10	Base, Datum	Bottom of the base
S1, S2	Gutter	Gutter concrete
S3	Base	Base