ShoulderIntersectRight

The ShoulderIntersectRight subassembly creates a shoulder extended to a daylight point based on the shoulder slope and subgrade grade. It only operates to the right.

Attachment

The attachment point is at the inside edge of the right paved shoulder, which is typically at the outside edge-of-traveled way on the right side of the baseline.

Input Parameters

Note: All dimensions are in meters or feet unless otherwise noted. All slopes are in run-over-rise form (for example, 4 : 1) unless indicated as a percent slope with a “%” sign.

Parameter	Description	Type	Default
Top Inside Point Code	A list of codes to be assigned to the top inside point.	Comma-separated string	P1
Bottom Inside Point Code	A list of codes to be assigned to the bottom inside point.	Comma-separated string	P2
Outside Point Code	A list of codes to be assigned to the outside point.	Comma-separated string	P3
Top Link Code	A list of codes to be assigned to the top link.	Comma-separated string	L2
Bottom Link Code	A list of codes to be assigned to the bottom link.	Comma-separated string	L3
Depth Link Code	A list of codes to be assigned to the depth link.	Comma-separated string	L1
Depth	Depth of the shoulder below the attach point.	Numeric, positive	1.5 ft 0.45 m
Subgrade Grade	% slope of the subgrade.	Numeric	-4 ( % )
Shoulder Slope	Slope of the shoulder.	Numeric, positive	4 (: 1)
Material Code	A list of codes to be assigned to the material shape.	Comma-separated string	Subbase
Superelevation	Specifies to use superelevation slope.	Selection list	RightOutsideShoulder

Target Parameters

None.

Runtime Logical Assignments

None.

Output Parameters

None.

Behavior

The shoulder is inserted for the given shoulder depth, shoulder slope, and shoulder subgrade. The width is calculated where the shoulder slope and shoulder subgrade intersects. Then the points, links, and shapes are calculated.

Layout Mode Operation

In layout mode the subassembly displays the links comprising the shoulder.

Point, Link, and Shape Codes

The following table lists the point, link, and shape codes for this subassembly that have codes assigned to them. Point, link, or shape codes for this subassembly that do not have codes assigned are not included in this table.

Point, Link, or Shape	Code	Description
P1	Hinge, TopInsidePCode, Top	Top Inside Point Code
P2	BottomInsidePCode	Bottom Inside Point Code
P3	Daylight_Sub, OutsidePCode, Top	Daylight Subgrade, Outside Point Code
L1	DepthLinkCode	Depth Link Code
L2	Top, TopLinkCode	Top Link Code
L3	Datum, BottomLinkCode	Bottom Link Code
S1	MaterialCode	Material Code

Coding Diagram