Curb Return Parameters Tab (Alignment Properties Dialog Box)

For a curb return alignment, use this tab to review and edit design data.

Parent Alignment 1

Name

Specifies the alignment that forms the basis of the design at the start of the curb return alignment.

Curb Return End Point Station

Specifies the station value on the parent alignment where the curb return alignment starts.

Curb Return Offset Value

Specifies the offset of the curb return start point from its parent alignment. This field is editable.

Parent Alignment 2

Name

Specifies the alignment that forms the basis of the design at the end of the curb return alignment.

Curb Return End Point Station

Specifies the station value on the parent alignment where the curb return alignment ends.

Curb Return Offset Value

Specifies the offset of the curb return start point from its parent alignment. This field is editable.

Update Mode

Specifies whether the curb return alignment reacts to edits of the parent alignment or offset. This field is editable.

• Dynamic. The curb return alignment is updated in response to edits of other intersection objects.
• Static. The curb return alignment is at a fixed location, and does not respond to edits of other intersection objects.

Lock Mode

Specifies that the curb return is always geometry locked. The start and end of the curb return offset are located in relation to the nearest geometry points on the parent alignment.