Design Criteria Tab (Create Connected Alignment Dialog Box)

Use this tab to specify design criteria for the connected alignment.

Design Criteria Tab

Starting Design Speed: Specifies the design speed at the alignment starting station. If no other design speeds are applied to the alignment, then the Starting Design Speed is applied to the entire alignment.
Use Criteria-Based Design: Specifies whether design criteria is applied to the alignment. If this check box is cleared, then the Use Design Criteria File and Use Design Check Set options are not available.

Use Design Criteria File: Specifies whether to associate a design criteria file with the alignment. If this check box is cleared, then the design criteria file selector and Default Criteria table are not available.
Design Criteria File Selector: Specifies the design criteria file to associate with the alignment. The first design criteria file found in the following directory is used by default: C:\ProgramData\Autodesk\C3D <version>\enu\Data\Corridor Design Standards\<units>. Click to select a different design criteria file.
Default Criteria Table: Displays the standards formulas that are defined in the selected design criteria file. Click the Value column to change a criteria table.

Use Design Check Set Check Box: Specifies whether to associate a design check set with the alignment. If this check box is cleared, then the Design Check Set list is not available.
Design Check Set List: Displays the default design check set. You can either accept the default design check set, or use the list to select a different one from the drawing.
Design Check Set Selection: Edits or copies the current design check set, or creates a design check set.