2 Points line

2 Points line creates a finite line from two endpoints.

1. Select Construct tab > Geometry panel > Line menu > 2 Points to enter line-creation mode.
2. Pick or enter the location of the first point.
3. If you want to explicitly locate the second point, Pick or enter the location of the second point.
4. If you want to enter an angle and length (from which the second point is derived):
   • Enter the angle in degrees in the A field. The angle is specified counterclockwise from the direction of the X axis.
   • Enter the length in the L field.
5. Press the Enter key or click Create.
6. When you have finished creating lines, exit line mode.