You can use the F/S tab of the Milling Feature Properties dialog to view and edit feed and speed settings for the operation selected in the tree view.
Speed
The Speed section is for setting how fast the tool spins. The default units are RPM (revolutions per minute). Optionally select Use SFM (surface feet per minute) to change the units. FeatureCAM uses the Recommended speed value by default. You can optionally enter a different value and the override option is automatically selected. If you want to revert back to the recommended value, deselect override.
Feed
The Feed section is for setting how fast the tool moves through the stock. The default units are IPM (inches per minute) or MMPM (mm per minute). Optionally select Use IPR (inches per revolution), Use IPT (inches per tooth), Use MMPR (mm per revolution), or Use MMPT (mm per tooth) to change the units.
FeatureCAM uses the Recommended feed value by default. You can optionally enter a different value and the override option is automatically selected. If you want to revert back to the recommended value, deselect override.
Reset All clears any overrides you made to the feeds and speeds and returns the settings to the default value for tool attributes listed on that page.