Part Catcher — Enable this option if you want to activate the part catcher.
Already Supported — Enable this option to indicate that the part is already supported.
Push/Press — If you enable this option, the subspindle feeds slowly until it touches the part, then grabs it at the Grab distance.
Open dwell — Optionally enter the time, in seconds, to dwell after opening the spindle.
Close dwell — Optionally enter the time, in seconds, to dwell after closing the spindle.
Spindle Action — Select what you want the main and sub-spindles to do during synchronization:
Main Angle — Enter the angle that you want the main spindle to rotate to before the part is collected.
Sub Angle — Enter the angle that you want the sub-spindle to rotate to before it moves to collect the part.
Spindle Speed — Enter the spindle speed.
Sub-spindle feed rate — Enter the subspindle feed rate.
Transfer tool post — If your machine has multiple tool posts, select the correct transfer tool post.
Tool post control — Click the button to open the Transfer Tool Post Control dialog.
Part Catcher — Enable this option if you want to activate the part catcher.
Leave Supported — Enable this option if you want to keep the part supported.
Push/Press — If you enable this option, the subspindle feeds slowly until it touches the part, then grabs it at the Grab distance.
Open dwell — Optionally enter the time, in seconds, to dwell after opening the spindle.
Close dwell — Optionally enter the time, in seconds, to dwell after closing the spindle
Spindle Action — Select what you want the main and sub-spindles to do during synchronization:
Main Angle — Enter the angle that you want the main spindle to rotate to before the part is collected.
Sub Angle — Enter the angle that you want the sub-spindle to rotate to before it moves to collect the part.
Spindle Speed — Enter the spindle speed.
Sub-spindle feed rate — Enter the subspindle feed rate.
Transfer tool post — If your machine has multiple tool posts, select the correct transfer tool post.
Tool post control — Click the button to open the Transfer Tool Post Control dialog.
Already Supported — Enable this option to indicate that the part is already supported.
Leave Supported — Enable this option if you want to keep the part supported.
Leave Supported — Enable this option if you want to keep the part supported.
Push/Press — If you enable this option, the subspindle feeds slowly until it touches the part, then grabs it at the Grab distance.
Open dwell — Optionally enter the time, in seconds, to dwell after opening the spindle.
Close dwell — Optionally enter the time, in seconds, to dwell after closing the spindle
Spindle Action — Select what you want the main and sub-spindles to do during synchronization:
Main Angle — Enter the angle that you want the main spindle to rotate to before the part is collected.
Sub Angle — Enter the angle that you want the sub-spindle to rotate to before it moves to collect the part.
Spindle Speed — Enter the spindle speed.
Sub-spindle feed rate — Enter the subspindle feed rate.
Transfer tool post — If your machine has multiple tool posts, select the correct transfer tool post.
Tool post control — Click the button to open the Transfer Tool Post Control dialog.
Already Supported — Enable this option to indicate that the part is already supported.
Leave Supported — Enable this option if you want to keep the part supported.
Leave Supported — Enable this option if you want to keep the part supported.
Push/Press — If you enable this option, the subspindle feeds slowly until it touches the part, then grabs it at the Grab distance.
Open dwell — Optionally enter the time, in seconds, to dwell after opening the spindle.
Close dwell — Optionally enter the time, in seconds, to dwell after closing the spindle
Spindle Action — Select what you want the main and sub-spindles to do during synchronization:
Main Angle — Enter the angle that you want the main spindle to rotate to before the part is collected.
Sub Angle — Enter the angle that you want the sub-spindle to rotate to before it moves to collect the part.
Spindle Speed — Enter the spindle speed.
Sub-spindle feed rate — Enter the subspindle feed rate.
Transfer tool post — If your machine has multiple tool posts, select the correct transfer tool post.
Tool post control — Click the button to open the Transfer Tool Post Control dialog.
Support type — Select the type of support from:
Jaws Only — For steady rests, select this option to operate the jaws without moving the steady rest.
Push/Press — If you enable this option, the subspindle feeds slowly until it touches the part, then grabs it at the Grab distance.
Open dwell — Optionally enter the time, in seconds, to dwell after opening the spindle.
Close dwell — Optionally enter the time, in seconds, to dwell after closing the spindle.
Spindle Action — Select what you want the main and sub-spindles to do during synchronization:
Main Angle — Enter the angle that you want the main spindle to rotate to before the part is collected.
Sub Angle — Enter the angle that you want the sub-spindle to rotate to before it moves to collect the part.
Spindle Speed — Enter the spindle speed.
Sub-spindle feed rate — Enter the subspindle feed rate.
Transfer tool post — If your machine has multiple tool posts, select the correct transfer tool post.
Tool post control — Click the button to open the Transfer Tool Post Control dialog.
Support type — Select the type of support from:
Jaws Only — For steady rests, select this option to operate the jaws without moving the steady rest.
Open dwell — Optionally enter a dwell time after opening the spindle.
Transfer tool post — If your machine has multiple tool posts, select the correct transfer tool post.
Part Catcher — Enable this option if you want to activate the part catcher.