Overlap

Stop operation:

- Contour - Wire path - Contour start/end position - Inserted stop positions - Stop length - Overlap

Cutoff operation (clockwise):

- Contour - Normal contour start/end position - Inserted end position - Run-out - Stop length - Overlap

Cutoff operation (counter-clockwise):

- Contour - Normal contour start/end position - Inserted end position - Run-out - Stop length - Overlap

Note: The run-off back to the end position of the contour is at an angle. On some machines (for example, Agie), an angled run-off may not be allowable.

Warning: If the overlap is too large, a triangular piece of material is left, which may fall and halt the machine.