Dimensions tab (Part Handling)

Use the Dimensions tab to edit the dimensions of a Part Handling feature.

Select what you want to do from:

• Slug Transfer — Select this option to transfer the part from the main spindle to the sub-spindle.
• Reverse Slug Transfer — Select this option to transfer the part from the sub-spindle to the main spindle.
• Bar pull — Select this option to use the subspindle to grab and pull the bar of material further out of the main spindle.
• Part Support On — Select this option to enable part support such as a steady rest or tailstock.
• Part Support Off — Select this option to remove the part support.

Slug Transfer

Grab distance — Enter the grab distance.

Feed distance — Enter the feed distance.

Reverse Slug Transfer

Grab distance — Enter the grab distance.

Feed distance — Enter the feed distance.

Sub position — Enter the sub-spindle position.

Bar pull

Grab distance — Enter the grab distance.

Feed distance — Enter the feed distance.

Pull distance — Enter the pull distance.

Part Support On

Grab distance — Enter the grab distance in Z where you want the support to move to.

Feed distance — Enter the feed distance.

Part Support Off