The operation details report lists information for each manufacturing setup about cut type, cut depth and center point, tool details, speed/override, feed/override, and estimated manufacturing time.
To display this report, select View tab > Reports panel > Operation Details.
To print this report select File > Print and select
Operations List.
This information is displayed for each operation:
-
Part — This shows the filename of the part. If you have not saved your part, the default part name is FM1.
-
Date — This shows the date and time that the NC code was generated.
-
Stock — This shows the dimensions of your initial stock.
-
Mat — This shows the material name and hardness of the stock material.
-
Setup — This shows the name of the coordinate system that defines this Setup.
-
Origin — This shows the origin using the world coordinate system.
-
Op — This shows the operation number. The operation numbers start at 1 and are incremented by one for each operation. The operation number is followed by the feature name, and the operation name in parentheses.
-
F/S — This shows the speed and feed of the operation.
-
Tool — This shows the tool number and type.
-
Est. HP and
Power — When toolpaths are generated, the estimated horsepower needed for each operation is calculated by using the depth of cut, width of cut, feedrate, and stock material. The actual shape of the feature is not taken into account. Instead, just a simple straight cut is assumed when calculating the estimated horsepower. This number is reported as the
Est. HP. The estimated horsepower is calculated only for operations that are cut with flat bottom tools with a fixed depth. This includes 2.5D milling features, and 3D Z-level roughing and other 3D features with
Z increment set.