Angle line

Point, Angle line creates an infinite line through a point you select and at the angle you specify in degrees. To create the line:

1. Select Construct tab > Geometry panel > Line > Point, Angle to enter line-creation mode.
2. Enter the angle in degrees in the A field. The angle is specified counter-clockwise.
   • To specify the angle relative to a vertical line passing through the point, select the From Vert. option.
   • To measure the angle relative to a horizontal line passing through the point, select the From Horiz. option.
   • To measure the angle relative to an existing line, select the From line option.
3. Pick or enter the coordinates of the point.
4. If you selected From line, you are prompted to select the line.
5. Click Create.
6. Repeat the process from step 2 to create more lines.
7. When you have finished creating lines, exit line mode.