Audio File Settings - Import

Metadata Settings

Tape Name box

Select an option to determine how the tape name is set when importing clips.

Select:	To:
Enter Tape Name	Activate the Tape Name field where you enter the tape name. When selecting multiple files for import, this tape name is used for all imported files.
Tape Name from File Name	Use the name of the imported file as the tape name.
Tape Name from Directory	Determine the tape name from the detected directory structure. Use the Level field below to configure the relative path to the directory from which the tape name can be determined.

Level field

Set from which directory the tape name is taken, relative to the location of the clip in the directory structure.

Although available for all types of files, the Level field is intended for directory structures output by film scanners. A typical image file directory structure looks like this: ./<tape>/<resolution>/clip.######. In this case, selecting Levels Up 2 in the Level field identifies the directory that corresponds to the tape name (./<tape>). Enabled if Tape Name is set to Tape From Directory.

Tape Name field

Enter the name to use as tape name when importing the clip. Enabled if Tape Name is set to Enter Tape Name.

Timecode box

Timecode is read from the file header, when present. Not editable.

Sampling Rate box

Project assigns to the audio clip a sampling rate equivalent to the project's timing. Use Select Rate to set the frame rate with the Frame Rate box.

Frame Rate box

Select the frame rate of the imported clip. Enabled if the Rate box is set to Select Rate.

Drop Frame button

Enable to have use a drop frame mode. Disable to use non-drop frame mode. Only applies to clips running at 29.97 and 59.94 frame rates. Enabled if the Rate box is set to Select Rate.

Clip Settings

Clip Name box

Select how the clip is named when the file is imported.

Select:	To:
Enter Clip Name	Activate the Clip Name field so that you can manually enter the clip name. When selecting multiple files for import, this name is used for all imported files.
Clip Name from File Name	Use the name of the imported file as the clip name.

Clip Name field

Enter the name to use when importing the clip. Enabled if Name is set to Enter Clip Name.