Calculate bevel solder joints
  1. On the ribbon, click Environments tab Convert panel Bevel Solder Calculator .
  2. In the Calculation tab, enter input parameters.
  3. Click Calculate to calculate the joint. Result values are displayed in the Results area on the right side of the Calculation tab.
  4. Click OK to insert solder calculation into ProdName.

This procedure creates an example using the sample specifications:
  1. Start the Bevel Solder Joint Calculator.
  2. On the Calculation tab:
    • Set the Force to 2000 N.
    • Set the Part width to 30 mm.
    • Set the Part Thickness to 7.5 mm.
    • Set the Bevel Angle to 45 deg.
    • Select the Solder Material - Copper Solder.
    • Set the Tension Safety Factor to 4 ul.
    • Set the Shear Safety Factor to 3 ul.
  3. Click Calculate. See results in the Results area.
  4. Click OK.
Parent topic: Solder Joint Mechanical Calculators