Display the source file and provides BOM (Bill of Materials) settings used to create item numbers for balloons and parts lists.
|
Access: |
Ribbon:
Annotate tab
Table panel
Balloon
|
|
File |
Displays the source file for creating a BOM in the drawing. |
|
BOM Settings |
Selects the appropriate BOM view. The Parts Only view may be disabled in the source assembly. If you select the Parts Only view in the parts list, it is enabled in the source assembly. Note: BOM views are provided only for assembly sources.
|
BOM View
The choice of BOM View determines available settings and properties.
|
Structured Note: The Structured Properties are only available if the BOM view was not defined in the assembly Bill of Materials.
|
Level: First Level assigns a simple integer value to direct children. |
Minimum Digits provides control to set the minimum number of digits displayed for item numbering. The range is fixed from 1 to 6 digits |
|
All Levels provides full expanded numbering. This option provides a delimiter that works with expanded items. Child items receive indented concatenated numbering. |
Delimiter Sets a delimiter for structured item numbering. This option restarts numbering for each level. |
|
|
Parts Only |
Numbering: Numeric numeric text. |
Minimum Digits provides control to set the minimum number of digits displayed for item numbering. The range is fixed from 1 to 6 digits. |
|
Alpha provides full expanded numbering. This option provides a delimiter that works with expanded items. Child items receive indented concatenated numbering based on the same rules as in parts lists today. |
Case Select upper or lower |
|
|
Structured (legacy) |
Inheritance Determines if nested levels in a parts list inherit changes made to the item value of the parent assembly (for example, if the assembly item value changes from 1 to A, the nested parts change from 1.1, 1.2, to A.1, A.2). |
Delimiter Sets a delimiter for structured item numbering. |
|
Parts only (legacy) View properties are not applicable for Parts only (legacy) |
||