IvProjectedView defines a view orthographic or isometric to the base view on a drawing sheet.
IvProjectedViewModifier
IvCommonViewMixin
BasePart
| Name | Type | Description |
|---|---|---|
| OriginIndicatorClosestPoint | point | Point used to select the correct drawing curve on the view. If several curves are representing the entity, the one closest to the point is selected. The measure of closeness is the distance from the point to the center of the bounding box curve. |
| OriginIndicatorEntity | string | The face, edge name to use for drawing curve search. |
| OriginIndicatorIntent | any | The position on the drawing curve. Valid values are: :none, :startPoint, :endPoint, :midPoint, :centerPoint, :circularLeftPoint, :circularRightPoint, :circularTopPoint, :circularBottomPoint or Number in range 0…1. |
| OriginIndicatorPart | part | Intent Part that the curve was produced from. |
| OriginIndicatorLayer | string | The layer associated with the origin indicator. |
| OriginIndicatorStyle | string | The leader style associated with the origin indicator. |
| OriginIndicatorRelativeX | number | X-Offset of the origin indicator. Default: 0.0. |
| OriginIndicatorRelativeY | number | Y-Offset of the origin indicator. Default: 0.0. |
| OriginIndicatorVisible? | boolean | True if the origin indicator is visible (Default). |
| parentView | part | Defines the base view from which the Projected View is derived. This can be a sibling, i.e., both the base view and this view can be a child of a sheet. Defaults to 'Parent', which implies that the parent is a view. |
| sheet | part | (From IvCommonViewMixin) Defines the drawing sheet onto which the projected view is being placed. Defaults to 'Parent'. |
| viewName | string | (From IvCommonViewMixin) Name of the view to be displayed on the drawing below the Projected View. By default, this is the displayName of the Intent part. |
| viewScale | number | (From IvCommonViewMixin) Scale of the Projected View as decimal number. Defaults to 1.0 (full scale). |
| viewStyle | name | (From IvCommonViewMixin) Specifies the display style of the View. Valid values are: :hiddenLineRemoved, :hiddenLine, :shaded, :shadedHiddenLine, and :fromBase. The default value is :fromBase. |
| BreakAlignmentPosition | Any | (From IvCommonViewMixin). By default (when this Parameter is set to NoValue ), some view kinds may be aligned to the parent drawing view. Supplying the Point value to this Parameter, breaks View alignment, and repositions the View center into the Point |
| designViewRepresentation | string | (From IvCommonViewMixin) Name of a user-defined design view. This will specify the design view representation to be used to present the model in the view. Name must correspond to an existing design view. Default of "" represents the default design view of the model. |
| designViewAssociative | boolean | (From IvCommonViewMixin) Specifies whether the view should be kept associative to its specified design view representation. If this is True , then no items are allowed in the 'hiddenParts' list . Defaults to False . |
| hiddenParts | list | (From IvCommonViewMixin) List of parts to suppress. Each part of the list should be of type IvAdoptedPart or IvAssemblyDocument. May not be used if 'designViewAssociative' is set to True . Defaults to an empty list . |
| rotationAngle | number | (From IvCommonViewMixin) The Projected View is rotated by the specified angle around an axis perpendicular to the drawing. Defaults to 0. |
| displayTangentEdges | boolean | (From IvCommonViewMixin) Specifies whether to show tangent edges. If True , tangent edges are displayed. Default is False . |
| showViewLabel? | boolean | (From IvCommonViewMixin) If True , displays the view label on the sheet, overriding the setting in the standard style. Default is NoValue . |
| viewLabelPosition | point | (From IvCommonViewMixin) If specified, overrides the default view label position from Inventor. Specify a point on the sheet in sheet coordinates. The default is NoValue . |
| viewLabelFormattedText | string | (From IvCommonViewMixin) If specified, overrides the default view label string from Inventor (as defined in the view style); default is NoValue . |
| origin | point | (From BasePart) Defines the position of the view on the drawing sheet. The reference on the view is its center point . The origin of the sheet is its lower left corner (see note below). |
| ignorePosition? | boolean | (From IvCommonViewMixin) Ignores the Origin Rule , if True . Default value is False . |
| Name | Type | Description |
|---|---|---|
| height | number | (From IvCommonViewMixin) Can be used to retrieve the height of the view. This depends on the view scale and the displayed objects. The value is returned in project units. |
| width | number | (From IvCommonViewMixin) Can be used to retrieve the width of the view. This depends on the view scale and the displayed objects. The value is returned in project units. |
The coordinate system which applies to the origin of a view depends whether its Intent parent is a view or a sheet. For example, if the Intent parent is a view, and the origin of the parent view is Point(10,10,0), then origin = Point(0,0,0) will place the view on the center of the parent view, which is Point(10,10,0) on the sheet. If the Intent parent is a sheet, then origin = Point(0,0,0) will place the view on the lower-left corner of the sheet.