Use this dialog box to create a reference system for a viewport in paper space.
- Reference System
-
Select the reference system you want to create: Latitude-Longitude, Military Grid Reference System, United States National Grid, or Current Map Coordinate System.
- Current Map Coordinate System
-
The coordinate system of the current map.
- Scale
-
The view scale of the current map.
- Scale
-
Select or enter the actual scale at which the reference system displays.
- Precision
-
The precision options vary, depending on the units used by the reference system:
- Military Grid Reference System: A fixed set of precisions in meters or Grid Zones
- Angular (for example, latitude-longitude): A fixed set of degrees
- Linear (for example, United States National Grid): A fixed set of distances
- Unknown: map space units, defaulting to 4 - 5 horizontal grid lines
AutoCAD Map 3D toolset will draw grid lines at the precision level. Ticks are auto-generated. For angular grid lines, tick marks appear at 1/5 intervals; forlinear grid lines, tick marks appear at 1/10 intervals. For example, for a latitude-longitude system, if you specify grid lines at every 10 degrees, tick marks appear at every 2 degrees between the grid lines.