Description
The TABLEH entry defines coefficients of a Fourier Series for use in generating time-dependent dynamic loads.
You may enter as many terms as desired using continuation lines.
The function has the following form:
Format
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| TABLEH | TID | A0 | X0 | ||||||
| A1 | B1 | A2 | B2 |
Example
| TABLEH | 2 | 0 | 0 | ||||||
| 5.2 | -7.9 | 1.1 | 3.E-2 |
| Field | Definition | Type | Default |
|---|---|---|---|
| TID | Table identification number. | Integer > 0 | Required |
| A0 | Initial value of function. | Real | 0.0 |
| X0 | X value offset. | Real | 0.0 |
| Ai | Cosine coefficients. | Real | 0.0 |
| Bi | Sine coefficients. | Real | 0.0 |
Remarks
- Values of D will override the values specified on an SPC Bulk Data entry, if the SID is selected on the LOAD Case Control command.
- The Bulk Data LOAD combination entry will not combine an SPCR load.