To run the model, from a command line run:
$ pan -b STLH_t
The analysis progress is written to file STLH_t.out. To check progress run:
$ tail STLH_t.out
After the analysis completes, the last few lines of the output file STLH_t.out should be similar to the following:
inc = 34 time = 11921.886 iter = 1 eps = 0.60531E+03 inc = 34 time = 11921.886 iter = 2 eps = 0.89209E-12 Finished writing file results\ STLH_t_34.case Finished writing file results\ STLH_t_34_c.case Writing record: 2, time: 12070.1080521538 Increment end CPU wall for increment 34 = 00:00:00.48, since start = 00:00:45.78 Layer end Mesh preview volume = 17181.8507391381 Activated volume = 16969.6503833795 Activated percentage = 98.7649738146357 Finished writing file .$\$STLH_t.case Finished writing file .$\$STLH_t_c.case Analysis completed **************************** 2 Warnings **************************** **************************** 1 Critical warning **************************** CPU wall for printing = 00:00:18.77 CPU wall = 00:00:45.84 Approximate single thread simulation time = 00:10:13.25 Peak RAM used for this process = 310,636 kB END Autodesk AM Process Simulation
Actual CPU times will differ.
Run the mechanical analysis from the command line:
$ pan -b STLH_m
After the analysis completes, the last few lines of the output file STLH_m.out should be similar to the following:
------------------------------------------ Support structure removal time increment ------------------------------------------ CPU wall for substrate removal = 00:00:02.08 inc = 38 time = 211921.89 iter = 1 eps = 0.36639E+03 inc = 38 time = 211921.89 iter = 2 eps = 0.15893E-09 Optimizing rigid body motion... Initial RMS displacement = 1.172141E-01 Optimized RMS displacement = 8.741699E-02 Number of optimization iterations = 275 Rotation matrix = 1.000000E+000 3.240124E-005 2.535421E-005 -3.241485E-005 9.999999E-001 5.367471E-004 -2.533681E-005 -5.367480E-004 9.999999E-001 Translation = 4.687739E-003 1.286202E-002 6.891671E-002 Finished writing file results$\$STLH_m_38_f.case Finished writing file results$\$STLH_m_38.case Increment end CPU wall for increment 38 = 00:00:01.53, since start = 00:01:18.15 Layer end ------------------------------------------------------ Total number of equilibrium iterations: 85 Mesh preview volume = 17181.8507391381 Activated volume = 16969.6503833795 Activated percentage = 98.7649738146357 Finished writing file .$\$STLH_m_f.case Finished writing file .$\$STLH_m.case Analysis completed **************************** 34 Warnings **************************** **************************** 2 Critical warnings **************************** CPU wall for support removal = 00:00:01.61 CPU wall = 00:01:18.23 Total thermal & mechanical simulation time = 00:02:04.07 Approximate single thread simulation time = 00:26:53.67 Peak RAM used for this process = 1,315,336 kB END Autodesk AM Process Simulation
Actual CPU times will differ. Each of the warnings note a support structure element failure.