Lead in extension

Note: These options are not available for Vortex toolpaths.

Linear move — Enter the length of the lead in extension move that is tangential to the arc.

Extension of Vertical arc a Linear move of 10 and an Angle of 0. Leads of Vertical arc.

Note: This option is available only for a Choice of: Surface normal arc, Vertical arc, Horizontal arc, Horizontal arc left, and Horizontal arc right.

Angle — Enter the angle of the lead in extension move relative to the last toolpath segment.

Angle of 0.

Extension of Straight with a Distance of 10, and an Angle of 0. Leads of Surface normal arc.

Angle of 90.

Note: This option is available only for a Choice of: Surface normal arc, Vertical arc, Horizontal arc, Horizontal arc left, Horizontal arc right, and Straight.

Length — Enter the length of the lead in extension move.

Distance of 10.

Extension of Straight with a Distance of 10, and an Angle of 0. Leads of Surface normal arc.

Note: This option is available only for a Choice of: Extended move, Boxed, and Straight.

Radius — Enter the radius of the lead in extension move. This option is available only for a Choice of: Surface normal arc, Vertical arc, Horizontal arc, Horizontal arc left, and Horizontal arc right.

— Click to copy the Lead in extension values to the Lead out extension values.

— Click to copy the Lead out extension values to the Lead in extension values.

For more information see Using extensions.