PowerMill 2022.0.1 update
The fixes in PowerMill 2022.0.1.
| Toolpaths |
| A problem has been fixed where Slice Area Clearance with flats would add incorrect outside approaches within a pocket. PMILL-15600
|
| A problem has been fixed that caused PowerMill to close unexpectedly when using an empty triangle file as the block definition. PMILL-14666
|
| A problem has been fixed that caused PowerMill to become unresponsive when attempting to calculate a Surface Projection Finishing toolpath. PMILL-14848
|
| A problem has been fixed that could cause areas to be missed in the steep parts of a Steep and Shallow Finishing toolpath. PMILL-15183, PMILL-15408
|
| A problem has been fixed that could cause the ends of passes in a 3D Offset Finishing toolpath to be skewed. PMILL-11491, PMILL-13078
|
| A problem has been fixed that could cause passes in higher layers of an additive toolpath to occur before those in lower layers. PMILL-13823, PMILL-15071, PMILL-15705
|
| A problem has been fixed that could cause passes on flat areas of the model to be positioned incorrectly. PMILL-15750
|
| The time taken to calculate machining boundaries around flat areas of the model has been reduced. PMILL-15341, PMILL-15339
|
| Hole recognition |
| A problem has been fixed where reference surfaces were not being treated correctly (that is, were not being ignored) by hole recognition. PMILL-13193
|
| Toolpath export |
| A problem has been fixed that caused arcs to be unnecessarily polygonized when posting. PMILL-14550
|
| General |
| A problem has been fixed that caused the snapshot and print functions to show blank when PowerMill was used with later versions of NVIDIA® GPU drivers. PMILL-2256, PMILL-14951
|
| Customer error reporting (CER) |
| A problem has been fixed that could cause PowerMill to close unexpectedly when used with a 3Dconnexion SpaceMouse®. This issue was identified by CER. PMILL-14792
|
| A problem has been fixed that could cause PowerMill to close unexpectedly when attempting to calculate a toolpath using automatic collision avoidance and a negative thickness. This issue was identified by CER. PMILL-15279
|
| A problem has been fixed that caused PowerMill to close unexpectedly when attempting to calculate a Flowline toolpath. This issue was identified by CER. PMILL-15372
|
| A problem has been fixed that could cause PowerMill to close unexpectedly when attempting to calculate toolpaths that required the calculation of machining boundaries around flat areas of the model. This issue was identified by CER. PMILL-15718
|