Routing creates pipe bends or separate components.
Treat Bends and Fittings
Sets separate piping and fittings components that is fastened together (for example a weld or clamp).
Treat Bends as Pipe
Changes in direction when routing creates pulled pipe bends. Welds are not created.
Calculate Radius Based on Diameter
Sets the routing radius for turns. For example, 1.5D sets a 6" radius for 4" pipe.
Pipe Bend Default Settings
Sets the length of straight piping that extends before and after a turn.
Tangent Lengths are Equal
If set, the straight length before (L1) and after (L2) a turn are equal. If clear, you can specify L1 and L2 separately.