The following text presents the list of numbered errors that may appear during structure analysis.
|
100 |
Improper node number |
|
101 |
Improper element number |
|
102 |
Not enough memory |
| CABLES | |
|---|---|
|
300 |
Not enough memory while analyzing cable elements |
|
301 |
Not enough memory while analyzing cable elements |
|
302 |
Not enough memory while analyzing cable elements |
|
303 |
Not enough memory while analyzing cable elements |
|
304 |
Not enough memory while analyzing cable elements |
|
305 |
Output error while storing results for cable elements |
| ERRORS IN I/O SYSTEM | |
|---|---|
|
500 |
Internal error while handling file names |
|
501 |
Internal error while handling file names |
|
502 |
Internal error while handling file names |
|
503 |
Internal error while handling file names |
|
504 |
Data error, data files corrupted |
|
505 |
Not enough memory to run the job |
|
506 |
Data error, no information about load cases |
|
507 |
Inconsistent data about compatible nodes |
|
508 |
Internal error while analyzing rigid links |
|
509 |
Internal error while analyzing rotated nodes |
|
510 |
Internal error while analyzing rotated nodes |
|
511 |
Internal error while analyzing elastic supports |
|
512 |
Internal error while analyzing elastic supports |
|
513 |
Internal error while analyzing compatibilities |
|
514 |
Internal error while analyzing elastic compatibilities |
|
690 |
Internal error while analyzing rigid links |
| MODAL ANALYSIS | |
|---|---|
|
900 |
Input error while reading temporary results in modal analysis |
|
901 |
Output error while storing results of modal analysis |
|
902 |
Negative eigenvalue has been obtained |
|
903 |
Not enough memory while analyzing concentrated node weights |
|
904 |
Not enough memory while analyzing concentrated node weights |
|
905 |
Internal error while analyzing concentrated node weights |
| SPECTRAL ANALYSIS | |
|---|---|
|
920 |
Input error while reading temporary results during spectral or seismic analysis |
|
921 |
Output error while storing results of spectral or seismic analysis |
|
922 |
Input error while reading temporary results during spectral or seismic analysis |
|
923 |
Output error while storing results of spectral or seismic analysis |
|
924 |
Internal error during spectral or seismic analysis |
|
925 |
Output error while storing results of spectral or seismic analysis |
|
930 |
Error during saving damping and energy results |
|
940 |
Data error in seismic analysis |
|
950 |
Not enough memory to load spectrum in spectral analysis |
|
951 |
Data error in spectral analysis |
| TRANSIENT ANALYSIS | |
|---|---|
|
960 |
Internal error in transient analysis |
|
961 |
Data error in transient analysis, invalid configuration file |
|
962 |
Data error in transient analysis, invalid time step |
|
970 |
Internal error in transient analysis |
|
971 |
Data error in transient analysis, formula incorrect |
|
972 |
Data error in transient analysis |
|
973 |
Data error in transient analysis |
|
974 |
Output error while storing results of transient analysis |
|
980 |
Not enough memory in transient analysis |
|
981 |
Not enough memory in transient analysis |
|
982 |
Data error in transient analysis |
|
983 |
Data error in transient analysis |
|
984 |
Data error in transient analysis |
|
985 |
Data error in transient analysis |
|
986 |
Data error in transient analysis |
| MEMORY | |
|---|---|
|
1000 |
Not enough memory to run the job |
|
1001 |
Not enough memory to run the job |
|
1010 |
Output error while storing results for finite elements |
|
1011 |
Not enough memory to run the job |
|
1100 |
Not enough memory to run the job, problem too big |
|
1101 |
Not enough memory to run the job, problem too big |
|
1102 |
Not enough memory to run the job, problem too big |
|
1103 |
Not enough memory to run the job, problem too big |
|
1104 |
Not enough memory, too many isolated nodes |
| FE RESULTS | |
|---|---|
|
1230 |
Input error while reading temporary results for finite elements |
|
1231 |
Output error while storing temporary results for finite elements |
| FRONTAL SOLVER | |
|---|---|
|
1310 |
Output error while writing to a scratch file during frontal analysis |
|
1311 |
I/O error while opening a scratch file during frontal analysis |
|
1320 |
Input error while reading from a scratch file during frontal analysis |
|
1321 |
I/O error while opening a scratch file during frontal analysis |
|
1330 |
Output error while storing a matrix during frontal analysis |
|
1340 |
Not enough memory during frontal analysis |
|
1350 |
Internal error while opening a scratch file during frontal analysis |
|
1360 |
Not enough memory during frontal analysis |
|
1361 |
Not enough memory during frontal analysis |
|
1370 |
Internal error in frontal analysis, too big problem |
|
1400 |
Not enough memory for a matrix buffer |
|
1401 |
Input error while reading in a matrix |
| MEMORY | |
|---|---|
|
1410 |
Not enough memory for an eigenproblem buffer |
|
1420 |
Not enough memory to run the job, reduce problem size |
|
1421 |
Not enough memory to run the job, reduce problem size |
|
1422 |
Not enough memory to run the job, reduce problem size |
| EIGENVALUE PROBLEM | |
|---|---|
|
1430 |
Internal error during eigenproblem analysis |
|
1431 |
Not enough memory during eigenproblem analysis |
|
1450 |
Not enough memory during eigenproblem analysis |
|
1451 |
Output error while storing results of eigenproblem analysis |
| SKYLINE SOLVER | |
|---|---|
|
1900 |
Internal error in skyline solver, switch to frontal method if possible |
|
1901 |
Output error while storing a matrix in skyline solver |
|
1902 |
Output error while storing a matrix in skyline solver |
|
1903 |
Not enough memory in skyline solver |
|
1904 |
Input error while reading in a matrix in skyline solver |
|
1905 |
Input error while reading in a matrix in skyline solver |
|
1906 |
Output error while storing a matrix in skyline solver |
|
1920 |
Not enough memory to run the job |
|
1921 |
Not enough memory to run the job |
|
1922 |
Not enough memory to run the job |
|
1923 |
Not enough memory to run the job |
|
1930 |
Execution problem while opening a scratch file during skyline analysis |
|
1940 |
Input error while reading in a matrix in skyline solver |
|
1941 |
Input error while reading in a matrix in skyline solver |
|
1950 |
Input error while reading in a matrix in skyline solver |
|
1951 |
Input error while reading in a matrix in skyline solver |
|
1960 |
Internal error in skyline solver |
|
2010 |
Not enough memory to run the job |
|
2011 |
Input error while reading in a matrix in skyline solver |
|
2020 |
Internal error in skyline solver |
|
2021 |
Input error while reading in a matrix in skyline solver |
|
2030 |
Internal error in skyline solver |
|
2031 |
Output error while saving matrix on disk |
|
2040 |
Internal error in skyline solver |
|
2041 |
Input error while reading in a matrix in skyline solver |
|
2050 |
Input error while reading in a matrix in skyline solver |
| EIGENVALUE PROBLEM | |
|---|---|
|
2051 |
Not enough memory during eigenproblem analysis |
|
2052 |
Execution problem during eigenproblem analysis, zero elements on stiffness matrix diagonal |
|
2053 |
Execution problem during eigenproblem analysis, zero eigenvalue calculated |
|
2054 |
Execution problem, missing eigenvalue(s) |
|
2055 |
Not enough memory during eigenproblem analysis |
|
2070 |
Execution problem during eigenproblem analysis |
|
2080 |
Internal error during eigenproblem analysis |
|
2081 |
Not enough memory during eigenproblem analysis |
|
2082 |
Execution problem during eigenproblem analysis, modelization error |
|
2083 |
Execution problem during eigenproblem analysis, modelization error |
|
2084 |
Execution problem during eigenproblem analysis |
|
2085 |
Execution problem during eigenproblem analysis |
|
2086 |
Execution problem during eigenproblem analysis |
|
2095 |
Execution problem during eigenproblem analysis |
|
2110 |
Data error, linear load without effect (zero segment length) in planar load definition |
|
2120 |
Data error, data file of load records is corrupted |
|
2300 |
Internal error while handling element reactions |
|
2400 |
Not enough memory for a section buffer |
|
2500 |
Not enough memory for a scratch buffer |
|
2505 |
Internal error, invalid pointer reference |
|
2520 |
Output error while storing results on disk |
|
2521 |
Internal error, invalid pointer reference |
| EIGENVALUE PROBLEM | |
|---|---|
|
2540 |
I/O error while opening a scratch file during eigenproblem analysis |
|
2550 |
Internal error while reading from a scratch file during eigenproblem analysis |
|
2551 |
Input error while reading from a scratch file during eigenproblem analysis |
|
2560 |
Internal error while writing to a scratch file during eigenproblem analysis |
|
2561 |
Output error while writing to a scratch file during eigenproblem analysis |
|
2570 |
Internal error during eigenproblem analysis |
|
2571 |
Internal error during eigenproblem analysis |
|
2572 |
Output error while writing to a scratch file during eigenproblem analysis |
|
2573 |
Input error while reading from a scratch file during eigenproblem analysis |
|
2580 |
Internal error during eigenproblem analysis |
|
2590 |
Internal error during eigenproblem analysis |
|
2650 |
Data error while analyzing unilateral constraints, load at unsupported node |
| THE MODAL DECOMPOSITION METHOD | |
|---|---|
|
2701 |
Data error while Modal Decomposition Method |
|
2702 |
Data error while Modal Decomposition Method |
|
2703 |
Data error while Modal Decomposition Method |
|
2704 |
Data error while Modal Decomposition Method |
| THE LANCZOS METHOD | |
|---|---|
|
2800 |
Data error while Lanczos Method |
|
2801 |
Internal error during Lanczos Method; does not used now (Lanc_Ritz_Ort_Type) |
|
2802 |
Internal error during Lanczos Method; does not used now (Lanc_Ritz_Ort_Type) |
|
2803 |
Internal error during Lanczos Method: Number of required Ritz vectors > current Lanczos step |
|
2804 |
Memory allocation problem during Lanczos method |
|
2805 |
Error caused by open the files for additional I/O system |
|
2806 |
Error caused by read/write for additional file system |
|
2807 |
Error for additional I/O system: the array, connected with Buff, is not allocated |
|
2808 |
Error caused by i > j for param. Tau_3; |
|
2809 |
Convergence is not achieved for QR iterations - mode's definition. Possible - lack of positive definition of K |
|
2810 |
Execution problem caused by divide to zero for back_go. Possible - lack of positive definition of K |
|
2811 |
Execution problem caused by divide to zero for TR_Transf. Possible - lack of positive definition of K |
| THE BASIS REDUCTION METHOD | |
|---|---|
|
2850 |
Allocation error during Basis Reduction Method |
|
2851 |
Jacobi problem during Basis Reduction Method: possible, incorrect allocation of primary degrees of freedom |
|
2852 |
Source data error: number of required modes > number of primary degrees of freedom |
|
2653 |
Basis Reduction Method Error: leak of symmetry of reduced influence & mass matrices. Possible of incorrect allocation of primary degrees of freedom or ill conditioned stiffness matrix due to gross errors in FEM model |
| THE ITERATIVE SOLVER ERRORS | |
|---|---|
|
3000 |
Memory allocation error |
|
3001 |
Open additional output file error =3002, // zero length of current element: ELE_MatrEvaluation returns 0 |
|
3002 |
Too much aggregation levels - reduction not possible - reduce the number of aggregation levels |
|
3010 |
Error during Iterative Solver execution |
|
3011 |
Internal error |
|
3012 |
Internal error |
|
3013 |
Error during Iter. Solver Execution: j<i |
|
3014 |
Open file error during Iter. Solver |
|
3015 |
I/O error during ITER_SOLV execution |
|
3016 |
Error during Iter. Solver Execution |
|
3017 |
This method is not available |
|
3018 |
Neq_Old != Last Neq during renumeration |
|
3019 |
Number of blocks nblck > MAX_BLOCKS for Kc |
|
3020 |
I/O error during coarse matrix operations with file |
|
3021 |
Compatible node is set at support; temporary it is impossible |
|
3050 |
Memory allocation error during ITER_Eigen |
|
3060 |
Runtime error during Jacobi fo ITER_Eigen |
|
3061 |
Iterative solver: number of required modes > MAX_SIZE_SUBSP_PROB |
|
3065 |
There is impossible to apply the PCG_Ritz method when nModes = 1 (Should be: nModes >1) |
|
3070 |
Runtime error during aggregation of coarse level model: primary node occurs as a first node into aggregate |
|
3080 |
Runtime error during correctness control: any nodes are not contained into any aggregates |
|
3090 |
The flat stress-strain state elements are not available |
|
3200 |
Error during open file for I/O system |
|
3210 |
Block subspace iteration method will be ineffective. Choose the different method |
|
3220 |
Blocksize error during block subspace iteration method - internal error |
|
3230 |
Nonpositive defined mass matrix error: (V*M*V) <= 0 |
|
3240 |
Too many modes: lastvect > NoOfLegalDOF |
| THE SPARSE SOLVER ERRORS | |
|---|---|
|
3300 |
Open file error |
|
3301 |
Init class CSparse for sparse direct solver |
|
3302 |
Number of equation in front is zero |
|
3303 |
Internal run error during estimation of memory |
|
3304 |
Internal run error during symbolical factorization |
|
3305 |
Internal run error during resolution stage |
|
3305 |
Internal run error during symbolical factorization |
|
3306 |
I/O error during storage of decomposed part of matrix |
|
3307 |
Insufficient memory during run |
|
3308 |
Skipped element during step = 0 |
|
3309 |
Errors during run |
|
3310 |
Error during open file for matrix factor |
|
3311 |
Number of required r.h.s > number of computed r.h.s |
|
3312 |
Error during init of second matrix |
|
3313 |
Inadmissible type of solver |
|
3320 |
Error during initialization of adjacency graph |
|
3321 |
Unknown reordering method |
|
3322 |
Error during MDA reordering |
|
3323 |
Error during multifrontal solver |
|
3324 |
Too many prev. fronts - multifrontal solver |
|
3325 |
Create new front error |
|
3326 |
Aggregate front error |
|
3327 |
Prepare front error |
|
3328 |
Set decomposed part error |
|
3329 |
Error during multifrontal solver - renum. NDM |
|
5000 |
General page fault (if possible, save the example and send it to technical support) |