This dialog allows you to specify the transfer options when sending a Revit model to Robot.
Dialog elements
- Scope and correction
-
- Send entire project (ignore current selection)
- Takes the entire structure model into account during the link process (this is a default option; it is used to avoid exporting a casually selected element).
- Send only current selection
- Takes only the selected elements into account during the link process.
- Specify the case that contains self-weight
- Select this option to assign the structure self-weight to any user-selected load case defined in Revit.
- Load case drop-list
- Specifies a Revit load case. The structure self-weight in Robot will be assigned to this load case.
- Ignore self-weight
- Ignores the self-weight while the structure transfers (after calculations the self-weight is automatically assigned to the first load case).
- Transfer (optionally)
-
- Use plan views as backgrounds
- Plan views defined in Revit will be used as backgrounds in Robot.
- Reinforcement projects (beams, columns, spread footings)
- Transfers reinforcement generated on Revit objects to Robot RC modules.
- Steel connections
- The steel connections defined in Revit will be transferred to the steel connections design module in Robot.