Define the ViewCube Face Views

Specify the direction of the face views on the ViewCube.

Along with the Front view, the Up direction of a model is also used to specify the direction of the face views on the ViewCube.

To define the Front view

• Right-click the ViewCube and click Set Front to View, and select (Current View).
Note: The Front view can only be set to the current view or to an existing elevation view in the model.

To restore the Front view

• Right-click the ViewCube and click Reset Front.

To reorient the current view to a preset orientation

• Click one of the faces, edges or corners on the ViewCube.

To view an adjacent face

Note: Make sure a face view is current.
• Click one of the triangles displayed near the edges of the ViewCube.
  

To reorient the view

• Click the ViewCube, hold down the left mouse button and drag to orbit the model.

To use animated transitions when reorienting a view to a preset orientation

1. Right-click the ViewCube, and click Options.
2. In the Options dialog, under When Clicking on the ViewCube, click Use Animated Transition when Switching Views.

   When checked, transitions from one view to another appear animated when clicking a pre-defined area on the ViewCube.

3. Click OK.

To automatically fit the model after a view orientation

1. Right-click the ViewCube, and click Options.
2. In the Options dialog, under When Clicking on the ViewCube, click Fit-to-View On View Change.

   When checked, clicking on a pre-defined area of the ViewCube reorients the model and fits the model to the window.

3. Click OK.

To roll a face view

Note: Make sure a face view is displayed.
• Click one of the roll arrows displayed above and to the right of the ViewCube.

  The left roll arrow rotates the view 90 degrees counterclockwise, while the right roll arrow rotates the view 90 degrees clockwise.