Fan Z., Speight R. 2017. Modelling and Material Data Issues Of Injection Molding Simulation.21th International Conference on Composite Materials, Xi’an, China
Fan Z., Yu H., Zuo Z., Speight R.. 2017 Anisotropic Thermo-viscous-elastic Residual Stress Model for Warpage Simulation of Injection Molded Part, Soc.塑料。Eng. 程序。of Annual Technical Conference (ANTEC), Anaheim
Fan Z., Xu S., Zuo Z., Ray S. 2017. Dual Mesh Approach for Three-dimensional Warpage Simulation of Injection Molded Plastic Parts, Proc.NAFEMS World Congress
Zuo Z., Fan Z., Costa F., Astbury D. 2016. Warpage simulation of injection over-molding plastics on continuous fiber reinforced composites.Soc.塑料。Eng. 程序。of Annual Technical Conference (ANTEC)
Bakharev A., Fan Z. and Astbury D. 2014. Using One-side Constraints to Improve Prediction of Core-Shift During Mold-Filling Simulation.Plastics Engineering, 40-44
Fan Z., Yu H., Xu J. and Astbury D., 2013.Buckling prediction in 3D warpage simulation of injection molded plastics.程序。Soc.Plastics Eng.Annual Technical Conference (ANTEC)
Fan Z., Astbury D., Wang H., Friedl C.,2011.Geometric Nonlinearity in 3D Warpage Simulation of Injection Molded Plastics.SPE ANTEC Proceedings, Boston
Hadinata, C., R. Zheng, C. Friedl, P.K. Kennedy, P. Zhu, and G. Edward.2007. Material Characterization for Injection Molding Simulation.程序。23nd Annual Conference of the Polymer Processing Society, Salvador, Brazil : 28-11.
Kennedy, P.K., R.G. Speight, C. Friedl and F. Costa.2007. Best Practice for Bench-marking Injection Molding Simulation, Polymer Process Engineering 07, Bradford: 299-321.
Thomas, A.R., R.G. Speight and M. Annareddy.2007. Using Injection Molding Simulation to Develop Environmentally Friendly Products, Polymer Process Engineering 07, Bradford : 474-492.
Zheng, R., and P. K. Kennedy.2006. Impact of Flow on Crystallization and Impact of Crystallization on Flow in Injection Molding.2006 Academic Workshop on Advanced Forming Technology and Materials Processing, Shanghai: 222-230.
Costa, F. S., H. Yokoi, Y. Murata, and P. K. Kennedy.2006. Numerical Simulation of Ear-flow: The Faster Advance of the Flow Front at the Edge of a Cavity.程序。22nd Annual Conference of the Polymer Processing Society, Japan.
Jin, X. 2006. Modeling of Short Fiber Composite Strength.程序。22nd Annual Conference of the Polymer Processing Society, Japan.
Han, S., and X. Jin.2006. The Numerical Analysis of Injection-Compression Molding of Thermosets, Proc.22nd Annual Conference of the Polymer Processing Society, Japan.
Zheng, R., and P. K. Kennedy.2006. Anisotropic Thermal Conduction in Injection Molding, Proc.22nd Annual Conference of the Polymer Processing Society.日本。
Fan, Z., C. Kietzmann, S. Ray, F. Costa, and P. Kennedy.2005. Three Dimensional Cooling and Warpage Simulation for the Injection Over-Molding Process, SPE ANTEC Proceedings, Boston: 568-572.
Cook, P., H. Yu, C. Kietzmann, and F. Costa.2005. Prediction of Flow Imbalance in Geometrically Balanced Feed Systems, SPE ANTEC Proceedings, Boston: 526-530.
Lin, B., P. Brincat, Z. Yuan, and X. Jin.2005. Interfacing Process Setting Data Between Analysis and Machine Control, SPE ANTEC Proceedings, Boston: 2227- 2231.
Ray, S. R., F. S. Costa, and P. K. Kennedy.2005. Three-Dimensional Simulation of Gas-Assisted Injection Molding, SPE ANTEC Proceedings, Boston: 451-455.
Farrington, P., and R. Speight.2005. Geometry Dependent Flow Properties of Long Glass Fiber Reinforced Polypropylene, SPE ANTEC Proceedings, Boston: 764-768.
Fan Z., Zheng R., Yu Y., Costa F. and Kennedy P. 2004. Warpage Simulation of Injection Molded Plastic Parts.6th World Congress on Computational Mechanics, Beijing, China
Bakharev, A., R. Zheng, Z. Fan, F. S. Costa, X. Jin, and P. K. Kennedy.2005. Corner Effect in Warpage Simulation, SPE ANTEC Proceedings, Boston: 511-515.
Han, S., F. Costa, and S. Ray.2004. Integrated Flow Analysis During Filling and Post-Filling Stage of Thermoset Molding, Proceedings of NUMIFORM 2004, Ohio, Jun 13-17: 180-185.
Zheng , R. and P.K. Kennedy, 2004.Flow-induced Orientation in Shear Flow and Injection Molding of Semicrystalline Polymer, Proceedings of Material Processing for Properties and Performance, Singapore, November 24-26: 876-885.
Lin, B., X. Jin, R. Zheng, F. Costa, and Z. Fan.2004. 3D Fiber Orientation Simulation for Plastic Injection Molding, Proceedings of NUMIFORM 2004, Ohio, Jun 13-17: 282-287.
Shoemaker, J., K. Hayden, P. Englemann, and P. Miller.2004. Designing the Cooling System: What's the Relationship between Mold Material Selection, Water Line Spacing and Mold Surface Temperature Variation, SPE ANTEC Proceedings, Chicago: 823-827.
Han, S., F. Costa, S. Ray, and S. Willmorth.2004. Three-Dimensional Dynamic Simulation of Paddle Shift During Semiconductor-Chip Encapsulation, SPE ANTEC Proceedings, Chicago: 1684-1688.
Bakharev, A., Z. Fan, F. Costa, S. Han, X. Jin, and Peter Kennedy.2004. Prediction of Core Shift Effects Using Mold Filling Simulation, SPE ANTEC Proceedings, Chicago: 621-625.
Yu, H., C. Kietzmann, P. Cook, S. Xu, F. Costa, and P. K. Kennedy.2004. A New Method for Simulation of Injection Molding, SPE ANTEC Proceedings, Chicago: 641-644.
Brincat, P., R. Speight, A. Bakharev, and P. K. Kennedy.2004. Use of In-Line Viscosity Control Method to Stabilise Part Quality During Regrind Variation, SPE ANTEC Proceedings, Chicago: 609-613.
Fan, Z., B. Lin, F. Costa, X. Jin, R. Zheng, and P. K. Kennedy.2004. Three Dimensional Warpage Simulation for Injection Molding, SPE ANTEC Proceedings, Chicago: 491-495.
Kennedy, P. K.,and R. Zheng.2003. Crystallization and Simulation of Injection Molding, Polymer Crystallization and Structure Formation in Processing, Johannes Kepler University, Linz, Austria, Sep 19-20.
Costa, F. S., S. R. Ray, S. Han, B. Lin, and Z. Fan.2003. Advances in Three Dimensional Simulation Technology For Injection Molding, Proc 8th Japan International SAMPE Symposium: 605-608.
Hayden, K., P. Engelmann, J. Shoemaker, and M. Monfore.2003. Keeping it straight: The Five Sided Box, SPE ANTEC Proceedings: 910-914.
Jaworski, M., and Z. Yuan.2003. Theoretical and Experimental Comparison of the Four Major Mesh Types Currently Used in CAE Injection Molding Simulation Software, SPE ANTEC Proceedings: 642-646
Farrington, P., R. Speight, and A. Bakharev.2003. The Role of Plastication in the Rheology of Injection Molded Thermoplastics.Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
Bakharev, A. S., and R. G. Speight.2003. Automatic Melt Preparation Setup for Reciprocating Screw Injection Molding Machines, Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
Zheng, R., and P. Kennedy.2003. Modeling Flow-induced Crystallization.Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
Kennedy, P., and R. Zheng.2003. Prediction of Flow-induced Crystallization in Injection Molding.Paper presented at the Nineteenth Annual Polymer Processing Society Meeting, July, in Melbourne, Australia.
Han, S., R. Zheng, P. Kennedy, J. Xu, and L. Kishbaugh.2003. Numerical analysis of microcellular injection molding, SPE ANTEC Proceedings: 696-700.
Han, S., F. Costa , and S. Ray.2003. Three-Dimensional Simulation of Wire Sweep During Semiconductor-Chip Encapsulation, SPE ANTEC Proceedings*:*1310-1314.
Ray, S., and F. Costa.2003. Flow prediction in the presence of inserts for the injection over-molding process, SPE ANTEC Proceedings: 632-636.
Astbury, D., A. Bakharev, and R. Speight.2003. Automatic Injection Velocity Initialization for Computer-Assisted Injection Molding Setup, S**SPE ANTEC Proceedings 576-581.
Bakharev, A., and R. Speight.2003. Closed-Loop Process Control Strategies For Thermoplastic Injection Molding, SPE ANTEC Proceedings: 382-387.
Coates, P. D., L. Mulvaney-Johnson, R. G. Speight, P. Brincat, and A. S. Bakharev.2003. Setup and Optimisation of The Gas Assisted Injection Moulding Process Using An Expert System, SPE ANTEC Proceedings: 419-424.
Bakharev, A. S., R. G. Speight, and A. R. Thomas.2002. Automated Plastication Setup For Injection Molding Machines, SPE ANTEC Proceedings, San Francisco, 2002.
Bakharev, A. S., R. G. Speight, and P. A. Brincat.2002. Closed Loop Viscosity Control for Injection Molding, SPE ANTEC Proceedings, San Francisco.
Kennedy, P., and R. Zheng.2002. High Accuracy Shrinkage and Warpage Prediction for Injection Molding, SPE ANTEC Proceedings, San Francisco.
Zheng, R., P. Kennedy, X. Yu, and L. Kishbaugh.2002. Simulation of the MuCell® Process in Injection Molding, SPE ANTEC Proceedings, San Francisco.
Han, S., F. Costa, P. Cook, and S. Ray.2002. Three-Dimensional Simulation of Thermoset Injection Molding Applied To Semiconductor-Chip Encapsulation, SPE ANTEC Proceedings, San Francisco.
Sherbelis, G., and R. Speight.2001. On-Line Viscosity Control for the Injection Molding Process, SPE ANTEC Proceedings, Dallas: 433-439.
Costa, F. S., S. Ray, C. Friedl, P. S. Cook, and S. Xu.2001. The Effect of Inertia on Fill Pattern in Injection Molding, SPE ANTEC Proceedings, Dallas: 454-459.
Speight, R. G., L. Reisinger, C. Lee, and M. Spence.2001. Automated Injection Molding Machine Optimization, SPE ANTEC Proceedings, Dallas: 553-559.
Zhao, Z., and X. Jin.2001. Property Separation Based on Inversion of Micro-Mechanics, SPE ANTEC Proceedings, Dallas: 560-562.
Trahan, J. S., K. Hayden, P. Engelmann, and J. Shoemaker.2001. Understanding the Source of Reduced Mechanical Properties in Reinforced Molded Products, SPE ANTEC Proceedings, Dallas: 709-713.
Zheng, R., and P. Kennedy.2001. Numerical Simulation of Crystallization in Injection Molding.CD-ROM Proceedings of 6th World Congress of Chemical Engineering, September 23-27, in Melbourne, Australia.
Lin, B., W. G. Ryim.2000. Gate Location Optimization in Injection Molding Processing.Paper presented at CAE and Related Innovations for Polymer Processing, in Orlando, Florida.
Jin.X. 2000. Runner System Design Optimization for Multigated and Multicavity Injection Molds.Paper presented at CAE and Related Innovations for Polymer Processing, in Orlando, Florida.
Speight, R. 2000. Injection Molding Process Control, SPE ANTEC Proceedings, Vol.III: 3853-3857.
Wang, T. J., and C. K. Yoon.2000. Shrinkage and Warpage Analysis of Injection-Molded Parts.SPE ANTEC Proceedings, Vol.I: 687-692.
Turng, L. S., J. Lottey, M. Mahishi, N. Yildirim.N. Mandar, and B. Gupta.2000. Application of Internet and Web Technologies for Management of Molding Know How.SPE ANTEC Proceedings, Vol.I: 596-600.
Barton, K. S., B, Lin, and W. G. Ryim.2000. Automatic Design Optimization Molding Simulation for Injection Molded Parts, SPE ANTEC Proceedings, Vol.III: 3006-3010.
Duff, A. L. 2000. Increased Speed to Market Using CAE Simulation for Injection Molded Parts, SPE ANTEC Proceedings, Vol.III:3002-3005.
Wang, T. J., S. C. Chen, and H. H. Chiang.2000. Applications of Gas-Assisted Injection Molding and Injection/Compression Molding in Thinwall Molding, SPE ANTEC Proceedings, Vol.I: 569-574.
Thomas, A. R., and P. Kennedy.2000. Linking Design to Analysis: The Future of Simulation for Injection Molding, SPE ANTEC Proceedings, Vol.III:2982-2988.
Fan, Z., R. Zheng, P. Kennedy, H. Yu, and A. Bakharev.2000. Warpage Analysis of Solid Geometry, SPE ANTEC Proceedings, Vol.I: 723-726.
Zheng, R., P. Kennedy, X-J. Fan, N. Phan-Thien, and R. I. Tanner.2000. Brownian Dynamics Simulation of Non-Dilute Fibre Suspension Flows in a Centre-Gated Disk, SPE ANTEC Proceedings, Vol.I: 671-674.
Kennedy, P., and R. Zheng.1999. The Effect of Injection Molding on the Mechanical Properties of Short Fiber Reinforced Thermoplastics, Institute of Materials Engineering Australia, Melbourne, December 1999.
Kennedy, P. 1999. Linking Design to Analysis: New Trends in Simulation for Injection Molding.Nanyang Technological University, School of Mechanical and Production Engineering Industry Symposium '99, Singapore.
Rewal, N., D. Toncich, and C. Friedl.1999. Predicting Part Weight in Injection Moulding Using Nozzle Based Measurements.Paper presented at the Fifteenth Annual Polymer Processing Society Meeting, June 1–4, in s-Hertogenbosch, The Netherlands.
Bakharev, A., and D. Astbury.1998. Asymmetrical Simulation of Filling and Packing Stages of Injection Molding Process.SPE ANTEC Proceedings, Vol.III: 594-598.
Talwar, K., F. Costa, V. Rajupalem, L. Antanovski, and C. Friedl.1998. Three Dimensional Simulation of Plastic Injection Molding.SPE ANTEC Proceedings, Vol.III: 562-566.
Brincat, P., C. Friedl, and K. Talwar.1998. Extensional Viscosity Modelling for Injection Molding Simulation, SPE ANTEC Proceedings, Vol.III: 552-556.
Speight, R. G., A. J. Munro, and A. Khassapov.1998. Benefits of Velocity Phase Profiles for Injection Molding.SPE ANTEC Proceedings, Vol.I:520-524.
Shoemaker, J., C. Kietzmann, P. Engelmann, and E. Dawkins.1998. Cooling Prediction on Non-Watered Copper and Steel Mold Cores.SPE ANTEC Proceedings, Vol.I: 841-845.
Hu, W., N. Singh, D. Thevalingam, and C. Friedl.1998. Application of Case-Based Technology in Mould Design System, SPE ANTEC Proceedings, Vol.I: 864-868.
Talwar, K., F. Costa, V. Rajupalem, L. Antanovski, C. Friedl, and P. Kennedy.1998. Three Dimensional Simulation of Plastic Injection Molding, Molding '98, Executive Conference Management, Michigan.
Zhao, J. , D. Thevalingam., and C. Friedl.1998. Classification system for feature based injection moulded plastic parts.Pacific Conference in Manufacturing Engineering, Brisbane, Australia.
Rajupalem, V., K. Talwar, and C. Friedl.1997. Three-Dimensional Simulation of the Injection Molding Process, SPE ANTEC Proceedings, Vol.I: 670-673.
Kennedy, P., and H.Yu.1997. Plastic CAE Analysis of Solid Geometry,SPE ANTEC Proceedings, Vol.I: 666-669.
Rowland, J. C., and D. O. Kazmer.1997. Quantifying the Economic Value Added of On-Line Quality Control Systems, SPE ANTEC Proceedings, Vol.I: 399-404.
Speight, R. G., and J. D. Hull.1997. Pressure Measurements for Injection Molding Control, SPE ANTEC Proceedings, Vol.I: 561-
Speight, R. G., P. D'Agostino, and J. S. Herrmann.1997. Melt and Mould Temperature Measurements for Polymer Injection Molding, SPE ANTEC Proceedings, Vol.I: 568-572.
Sherbelis, G., E. Garvey, and D. Kazmer.1997. The Methods and Benefits of Establishing a Process Window, SPE ANTEC Proceedings, Vol.I: 545-550.
Sherbelis, G., and J. Barnes.1997. Bringing CAE to Production, SPE ANTEC Proceedings, Vol.I: 662-665.
Nebauer, W., and A. Carpenter.1997. The Importance of Pressure Dependent Viscosity in Injection Molding Shrinkage Simulation Software -- A Verification Study,SPE ANTEC Proceedings, Vol.I: 1047-1053.
Ray, S., K. Talwar, C. Friedl, W. Thompson.1997. Incorporation of Viscoelastic Constitutive Equations in the Injection Moulding Process.Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 249-258.
Brincat, P., C. Friedl, K. Talwar, and W. Thompson.1997. Contraction Pressure Losses in the Injection Moulding of Polymers.Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 239-248.
Rewal, N., D. Toncich, and G. Sherbelis.1997. Intelligent Quality Control Strategies for Injection Moulding.Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 661-670.
Song, W. Q., S. Masood, W. Thompson, C. Friedl, and D. Liming.1997. Investigation on Metal-Polymer Composites for Fused Deposition Modelling.Proceedings of the World Congress Manufacturing Technology Towards 2000, Cairns, Australia: 465-471.
Zhang, C. Y., J. Leonard, and R. G. Speight.1996. Adaptive Controller Performance Used for Ram Velocity Control During Filling Phase, SPE ANTEC Proceedings, Vol.I: 593-597.
Speight, R. G., J. B. Hull, and P. D. Coates.1996. Control of Polymer Melt Flow Front Position During the Injection Molding Process, SPE ANTEC Proceedings, Vol.I: 588-592.
Speight, R. G., E. P. Yazbak, and P. D. Coates.1996. In-line Process Measurement for Integrated Injection Molding, SPE ANTEC Proceedings, Vol.I: 508-512.
Friedl, C. 1996. Progress Towards True 3D CAE Analysis for Injection Molding, SPE ANTEC Proceedings, Vol.I:731–735.
Sherbelis, G., and C. Friedl.1996. The Importance of Pressure Dependent Viscosity and Contraction Pressure Losses in Injection Molding CAE Analysis, SPE ANTEC Proceedings, Vol.I: 778–782.
Bakharev, A. S., and C. L. Tucker.1996. Predicting The Effect of Preforming on RTM Mould Filling, SPE ANTEC Proceedings, Vol.I: 797–801.
Rowland, J., and D. Kazmer.1996. An On-line Quality Monitoring System for Thermoplastic Injection Molding, SPE ANTEC Proceedings, Vol.I: 513–518.
Zheng, R., N. McCaffrey, K. Winch, H. Yu, and P. Kennedy.1995. Predicting Warpage of Injection Molded Fiber-Reinforced Plastics, SPE ANTEC Proceedings, Vol.I: 111-111.
Nebauer.W. 1995.Comparison of Shrinkage Measurements and Computer Software Predictions for an Automotive Fascia Component, SPE ANTEC Proceedings, Vol.I: 923–925.
Costa, F., C. Friedl, and W. Thompson.1995. An Adaptation of the Boundary Element Method for Modeling Gas Injection Molding, in Simulation of Materials Processing: Theory, Methods and Applications, S. F. Shen and P. R. Dawson (Eds.), Proc of Numiform 95, Ithaca, New York: .