Grouping drawings of RC column sections

Using the Robot software, you can group drawings of calculated RC column sections (with a summary reinforcement table) in the same drawing:

1. Click Analysis menu > Design of RC Structure Elements > RC Column Design to select structure columns and switch to the module where you can calculate reinforcement in RC columns (required/theoretical reinforcement and provided/real distribution of reinforcement in a column).
2. Within the RC column design module, click File menu > Open.
3. In the right section of the Project Component Selection dialog, select columns to be grouped in 1 drawing, and press OK.
4. Click Analysis menu > Calculations in order to start calculations of reinforcement for selected RC columns.
5. In the Calculation Option Set dialog, selectCalculations according to list(you can also selectAdd drawing to the liston the Drawing Parameters dialog).
6. To open the Drawingsmodule, click Results menu > Drawing or click .
7. At the Perform operations for all loaded members prompt, click Yes.
8. Click Insert menu > Table of Columns.
9. In the Table of Columnsdialog specify the number of columns and rows into which the drawing will be divided. A drawing including cross-sections of selected columns will be added to the existing drawings.
10. ClickInsert menu > Reinforcement Table; a drawing containing descriptions of reinforcement for selected columns will be added to the existing drawings.

See also:

Grouping drawings in one format