Example: Create a bolted knee frame connection with haunch



  1. On the ribbon, click (Connection Vault).
    • Home Extended Modeling (Connection Vault)
    • Extended Modeling Joints (Connection Vault)
  2. From the Column - Beam category, select .
  3. Select the column and right-click.
  4. Select the beam on which the knee of frame should be created and right-click.
  5. Note: Click OK if prompted that no predefined connection for the selected sections was found in the connection library.

The joint is automatically created on the selected beams and can be modified in the Knee of frame bolted, with haunch dialog box.