To Specify the Riser Numbering Display for Individual Stairs

Use this procedure to define and display riser numbers for individual stairs.

1. Double-click the stair you want to change.
2. On the Properties palette, click the Display tab.
3. Under the General category, for Display component, verify that *NONE* is selected.
4. For Display controlled by, select This object.
   Note: To apply your changes to all stairs in the drawing, select Drawing default setting. To apply changes to all stairs of this style, select Stair Style:<style name>.
5. If necessary, expand Object Display Properties Advanced, and click next to Riser numbering.
6. Specify the riser numbering display properties for the stair:

   If you want to…	Then…
   change the text style of the riser numbers	select a style for Text Style, or click to edit the text style.
   change the alignment of the riser numbers	select an alignment for Text Alignment.
   change the orientation of the riser numbers	select an orientation for Text Orientation.
   change the text height of the riser numbers	enter a value for Text Height.
   change the location to which the numbers are justified	select Left, Center or Right for Justify to.
   change the location of the numbers along the length of the stair flight	enter a value for X Offset. This is relative to the selected position of the riser.
   change the location of the numbers to the left or right	enter a value for Y Offset. This is relative to the selected position of the riser.
   set the first number for the riser numbering	enter a value for First Riser Number.
   number the last riser in the stair	select Number Final Riser.

7. Click OK.

You can also access and modify these same cut plane settings through the stair’s context menu, as follows:

1. Select the stair you want to change, right-click, and click Edit Object Display.
2. Click the Display Properties tab.
3. Select the display representation where you want the changes to appear, and select Object Override.

   The display representation in bold is the current display representation.

4. If necessary, click .
5. Click the Riser Numbering tab.
6. Specify riser numbering settings as needed.
7. Click OK twice.