To Specify the Display of Endcaps in Model Views

Use this procedure to specify whether to display endcaps of openings in a selected wall in a display representation used for model views.

1. Double-click the wall.
2. Click the Display tab.
3. Under the General category, for Display component, verify that *NONE* is selected.
4. For Display controlled by, select This object.
   Note: To apply your changes to all walls in the drawing, select Drawing default setting. To apply changes to all walls of this style, select Wall Style:<style name>.
5. For Display representation, verify that the desired display representation is selected.
6. If necessary, expand Object Display Properties Advanced.
7. For Display opening endcaps, select Yes or No.